Controller Solar Raptor CON1 per lampade led Sunstrip
search
  • Controller Solar Raptor CON1 per lampade led Sunstrip
  • Controller Solar Raptor CON1 per lampade led Sunstrip
  • Controller Solar Raptor CON1 per lampade led Sunstrip
  • Controller Solar Raptor CON1 per lampade led Sunstrip
  • Controller Solar Raptor CON1 per lampade led Sunstrip

Controller Solar Raptor CON1

€82.00

CON1 controller for daily timing and regulation of Solar Raptor SunStrip and Solar Stinger LED strips.

Possibility of adjusting sunrise, sunset, duration, color and intensity of the SUNSTRIP LED lighting
"6-pin" connection system
3 splittable regulation channels

Requires a DRV power supply of adequate power to be connected to the mains.

Quantity

The "Solar Raptor CON1" Controller will allow you to control and program your Sunstrip Solar Raptor and Solar Stinger LED lighting systems.
It is a small computer equipped with a luminous screen through which you can time the luminous systems of your terrariums/paludariums/aquariums and much more:
you can adjust the intensity of the light, the percentage of UVA emitted, the color (by connecting the Sunstrip 35 Reptiles you can adjust the individual RGBs in the various phases of the day), program the time and duration of the sunrise and sunset phases obtaining a dimming effect thanks to the which the light will wax and wane in a very natural way.
For example, you can decide to light up your terrarium only at night, with a blue light Sunstrip Night LED strip. Or to use a white light Sunstrip Day during the day, alternating it with Sunstrip Night which will only work in the evening. Or use a Sunstrip 35 Reptile which, with its full range of RGB, will control day and night lighting with the colors of your choice.
The CON1 Controller is equipped with three different channels that you can adjust independently from each other, equipped with a 6-pin Solar Raptor connection: each channel can house one or more LED lamps (each channel can be split - even several times - with the aid of the Solar Raptor Y-cables) for a combined regulation of the lighting of several terrariums, paludariums, aquariums or environments that you wish to illuminate.

The CON1 output channel must be connected to a DRV/Solar Raptor power supply of suitable wattage, which can be purchased separately:
the power supply wattage must be equal to or greater than the total wattages of the LEDs connected to CON1.

Download the latest CON1 Controller firmware update at this link: DOWNLOAD

(to install the firmware updates, a mini USB cable is required, not included, to connect the CON1 to a PC)

VRVP8220

You might also like