HabiStat Rainmaker 2,2L

HabiStat Rainmaker offers the perfect solution to eliminate the need to manually spray your terrariums, plants or greenhouses.

It is easy to set up and reliable, it is perfect for adding realistic "rainfall" within your habitats.
Easy and convenient to fill at the top of the unit, you can change the cycle, duration and power by adjusting the knobs as needed.

First instructions:

The HabiStat Rainmaker features a 2.2-liter tank and delivers an adjustable rain stream using multi-directional nozzles. Simply cut the black tubing to the desired length and connect it to the blue connectors, push the connector seal down into the main unit as far as you can go (about 1 or 2cm) and connect a piece of approximately 30cm black tubing to the part bottom of the main unit and screw the filter onto the bottom.

• Place the main unit on a stable and hard surface, fill the 2.2L tank with water.
• Adjust the CYCLE (H) to set the nebulization frequency. The unit can be set in hours.
• Adjust the DURATION (S) to set the duration of the nebulization. The unit can be set in seconds.
• Insert the power adapter and connect it to the back of the main unit.
• Turn on the "POWER" button and adjust the intensity of the nebulization from minimum to maximum as necessary.
• The unit will begin to "rain" after the hours set on CYCLE (H).
• If you want to operate the unit manually, leave CYCLE (H) set to "O" and the unit will turn on immediately after pressing POWER. In this mode the unit will not turn off until POWER is pressed again.