Complete terrarium in PVC 60x40x40h cm

This PVC terrarium complete with lamp holder, thermostat and thermo-hygrometer is light and easy to assemble.
PVC is a high-quality, high-density durable material. It resists impacts and wear, offering your anal adequate protection by providing it with a comfortable and well-insulated living space.

The terrariums are equipped with independent vents to ensure air circulation.
They are versatile, lightweight and easy to transport;
Thanks to the transparent plexiglass front panels you will be able to observe your animals in complete safety;
The front panels slide in hard plastic channels which facilitate maintenance, cleaning and facilitate the task of feeding the animals.
On the front panel there are the switches of the individual lamp holders, the display of the on/off thermostat with probe that regulates the right lamp holder, a thermo-hygrometer on the left (it may be necessary to replace the batteries, 2x LR44).
They are potentially suitable for all types of reptiles, amphibians, invertebrates and arachnids with due attention to the size of the animal and its nature: it may be necessary to protect the lamps with protective grilles.

The electrical-electronic component is already mounted in the ceiling: you will only need one Phillips screwdriver to assemble the pieces of the terrarium together. All the lamp holders lead to a single plug for the electricity but on the front of the terrarium you can manage them separately via three different on/off switches. Furthermore, the lamp holder on the right is equipped with an on/off thermostat with probe, already integrated: you can therefore set the desired temperature and, by connecting ceramic or infrared lamps (be careful NOT lamps with red light!), always have a constant temperature .

Example of use of the PVC terrarium with Testudo hermanni:
A ceramic lamp set to 28-30° can be installed in the right lamp holder, regulated by the thermostat.
A compact UVB of around 8% can be installed in the central lamp holder, wattage to be chosen based on the size of the terrarium
An anion bulb can optionally be installed in the left lamp holder to capture dust particles and "clean" the air.

Example of use of the PVC terrarium with Pantherophis guttatus or other snakes:
In the right lamp holder, regulated by the thermostat, a ceramic or infrared lamp (not red!) can be installed, set to 28° (or the desired range based on the species). NB: It must be protected with the aid of a protective grille.
A low % UVB lamp or an LED can optionally be installed in the central lamp holder to act as a simple light to illuminate the terrarium during the day, or a small purple light to illuminate the terrarium at night while disturbing the animal less.
An anion bulb can optionally be installed in the left lamp holder to capture dust particles and "clean" the air.

Example of use of the PVC terrarium with Eublepharis macularius:
In the right lamp holder, regulated by the thermostat, a ceramic or infrared lamp (not red!) can be installed, set to 28-30°.
A low % UVB lamp or an LED can optionally be installed in the central lamp holder to act as a simple light to illuminate the terrarium during the day, or a small purple light to illuminate the terrarium at night while disturbing the animal less.
An anion bulb can optionally be installed in the left lamp holder to capture dust particles and "clean" the air.

Unused lampholders can simply be kept off, with the switch set to "0",