Daily cycle timer programmer

Instructions for use

• TIMER function: (programmable clock) slide the side switch down to enable clock. 
  To program the switching on of the connected device, lower the red sliders (each slider corresponds to 15 minutes) at the desired times. 
  With the sliders raised the device remains off. Turn the timer ring and position the symbol on the time corresponding to the insertion of the programmer into the mains socket. Insert the plug of the device to be powered into the timer socket.
• "Always on" function: move the side switch up, the clock is excluded and the device always remains on.

For internal use. 16A plug and 10/16A 2P+E 230V~ socket. Maximum power that can be drawn 3600W. Pins and active cells protected from accidental and/or voluntary direct contact.